Tee access valves

Tee access fittings SAE Flare 45°. Forged brass

Primary material: Forged brass EN 12165

Standard and regulation reference: PED 97/23/CE, RoHS 2002/95/CE, REACH Reg. 1907/2006, EN378-2:2008, SAE-FIT, SAE 45° J513-92, NPT ANSI B.1.20.1

Application: Suitable for air-conditioners and refrigerating systems that work with refrigerant proper to the group II Article 9, 2.2 of the PED Directive 97/23/CE, referring to the Directive 67/548/CEE. ( tested with the following: R12, R22, R134a, R404A, R407C, R410A, R502, R507, CO2 R744, R32 ). Not suitable for Ammonia R717

Working condition:
Max working pressure 45 bar (650 psi)
Temperature range -40°C to +150°C (-40°F to 300°F)

Recommended fitting condition:
Brazing temperature < 700°C (1300°F) for brass connections

Risk category according to Pressure Equipment Directive PED 97/23/CE: Article 3 Paragraph 3

Tube brazing connection I.D. internal diameter,  O.D. external diameter

Drawing Part number Schrader connections
SAE Flare
Connection
Without Schrader
A
(mm)
B
(mm)
    2x O.D. I.D. 1x Thread    
TC-01 TC-01 1/4″   6mm
3/8" (9,52mm)
  24 43
TC-02 TC-02 1/4″     NPT 1/8″
ext (male)
24 45
TC-03 TC-03 1/4″ 6mm     24 34
TC-04 TC-04 1/4″     Swivel
Nut 1/4″
with perc.
24 49÷57
TC-05 TC-05 1/4″     Swivel
Nut 1/4″
w/o perc.
24 49÷57
TC-06 TC-06 1/4″ 6mm     11 47
TC-07 TC-07 1/4″     Swivel
Nut 1/4″
w/o perc.
26÷34 24
TC-08 TC-08 1/4″     Swivel
Nut 1/4″
with perc.
26÷34 24
TC-09 TC-09 1x
1/4″
    2x
SAE 1/4″ ext (male)
24 47

 

The access fittings can be supplied with internal mechanisms and caps assembled.

TC Tee access fitting valves